Do It Yourself Faucet Repair Tips
By Chad Wiley
Don’t call a plumber! Fixing that leaking faucet is all too easy regardless of how poor a plumber you think you are.
To take on this job you will need a number two Phillips screwdriver, an adjustable wrench, Teflon tape and any type of lubricant for and stubborn or rusted parts. First, turn off the water supply. Generally, you can find the supply lines in your bathroom or beneath the kitchen sink, but just to be safe locate your main water supply and turn it off. Second, you have identify the number of knobs on your faucet because there are differences in repair protocol for each. Let’s say, for arguments sake that your faucet is has two handles. For single handle faucets there are little in repair parts and the entire stem should be replaced. If you read on the word stem, and how to remove it to match, will be explained.
The first step to fixing that leak is to take the screws out from the handles using a Phillips number two bit. Once the screws are removed the handles are free to pull off and will expose the stem. The stem can then be turned out counter-clockwise with the use of an adjustable wrench. Once removed you will be able to see that the stem will have some type of rubber at the end. Generally, these are what you would want to replace. If they look chewed or indented the water is by-passing this opening and dripping out of your spout. There will either be a screw to remove the rubber washer or a press in washer that can be removed with your fingernail.
Once you have the old rubber you’ll need to swing by your local hardware store to match the size. It is always a better idea to take the entire stem with you, as well as your handle, as they could be a part of your problem.
After procuring the proper repair washer and rubber seals simply replace the washer followed by the screw, or press the washer in until it is flush with the top of the stem. The unit can be threaded in clockwise after wrapping the threads in Teflon tape. Once you have done that, press the handle back on and check to make sure it is properly seated. If it is, simply insert the screw and tighten.
Now you can turn your water supply back on and check your work. If the leak persists check through the steps to ensure that everything was done in order.
About the Author: <a href=”http://www.allproservices-plumbing.com”>Plumber Richardson TX</a>
Plumbers in Dallas Tx
<a href=”http://www.allproservices-plumbing.com/plano-plumbing.html”>Plumber Plano TX</a>
Plumbing Lewisville
<a href=”http://www.allproservices-plumbing.com”>Slab Leak Repair Lewisville TX</a>
Five Things You Want from a Quality Vanity Faucet
By Gen Wright
The design of your home is not something you want to half-heartedly commit to. It is said that for most people their homes are their biggest investments. An investment should appreciate over time and be worth more the day you leave it than it was the day you moved in. But even if that day never comes, you want to take pride in where you live. You want a practical place, pleasing to the eye and pleasing to your guests.
As a result, there are a lot of things you need to think about in piecing together the right look, whether it is an investment property or your dream home. Everything from the trim of the ceiling fan to the paint on the walls is yours to control, and you can have as much or as little of it as you like. One area that many homeowners take for granted, but that can add a significant touch of class to the overall look and feel of your home can be found in the bathrooms.
Vanity faucets are assets of your home that most every guest will see. These often leave more of an impression than you think, and in choosing the right ones for your home, here are five things you will want to consider:
1. You want vanity faucets that catch the eye. The standard glass ball may work for some, but a truly memorable vanity faucet will match the overall theme of the restroom. With separate hot-and-cold levers and a variety of shapes and designs, you will find it easier than ever to inspire the admiration of your guests in this often overlooked aspect of your home.
2. You want vanity faucets that enhance and complement the look of your restroom. Chances are good that you want each room in your home to boast a personal touch. Why stop with the restroom? Choose a color and shape that speaks to the design styles you have chosen, and you will send a message of sophistication that will not be forgotten by your guests or a potential buyer.
3. You want vanity faucets that add to the unique feel of your home. By choosing something with a timeless appeal, you do not have to be a slave to trends. This all-important consideration can be appreciated whether you plan on staying at your home for twenty months or twenty years.
4. You want vanity faucets that get the job done. Don’t forget functionality. With both single-hole and widespread vanity faucets, you can rest assured that your selection will serve its purpose without overly wasteful energy costs.
5. You want vanity faucets that are cost affordable. Cost affordable means you won’t have to feel the cost of your vanity faucets when making your monthly payments or dolling out a lump sum. Why feel the pain of buyer’s remorse, when you don’t have to? By consulting with any home design sales specialist, you can have both style and economy without the sacrifice.
It may seem like a small decision, but when it comes to building or remodeling your own home, no decision should be trivial. Find vanity faucets you can live with, and rest assured the investment will always be worth the reward.
About the Author: Browse and buy <a href=”http://www.homedesignoutletcenter.com”>vanity faucets</a> – <a href=”http://www.homedesignoutletcenter.com”>www.homedesignoutletcenter.com</a>
